![]() ![]() GATE LEDs Similar to the COMP LEDs, the GATE LEDs whether the channel’s signal level is above or below the gate threshold. GAIN Encoder Adjusts the input sensitivity head amplifier module patched to that channel.ĬOMP LEDs Provide an in-channel indication of compressor status, showing whether the channel’s signal level is above or below the compressor threshold. INPUT A/B LED Remotely switches between the “A” and “B” inputs on input cards (LMY2-ML Mic/Line Head Amplifier modules feature switchable “A” and “B” mic/line inputs). TO ST Switch Assigns the signal from the corresponding input channel to the stereo mix bus. ![]() INPUT PAN Encoder Pans the channel signal from left to right on the stereo mix bus when the TO ST switch is engaged.Ĭan also be used for odd/even panning to variable-output mix bus pairs with some setups. ![]() INPUT MIX Encoder Sets the send level from the corresponding input channel to the currently selected mix bus. The LOCAL switch determines whether the mix bus selection applies only to the currently selected input channel block or all input channel blocks. The MIX SEND controls select the mix bus (1 … 24 or 1…48) to which the send level from the currently selected input channel will be adjusted. Controls MIX SEND Section The PM1D has 48 mix buses which can function as submasters or auxiliary sends. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |